€250.47
No tax
Registrate y consigue un descuento
Shelly USB Charger For Wall Display Stand- White
YOU MIGHT BE INTERESTED IN
€3.51
No tax
Registrate y consigue un descuento
SHELLY BY PASS
Load for installations that do not meet the minimum power, for the use without neutral of the Shelly Dimmer2 and Shelly 1L relays.
€10.77
No tax
Registrate y consigue un descuento
The switch frame needs to be attached to the Switch button. The switch frame comes with a frame plate in the same color for a stylish final touch.
RELATED PRODUCTS
€39.97
€72.67
No tax
Offer ends in:
€23.74
€52.76
No tax
Offer ends in:
€14.70
€32.67
No tax
Offer ends in:
€22.90
€50.89
No tax
Offer ends in:
€10.62
€21.23
No tax
Offer ends in:
Frequently Asked Questions
What are the wiring requirements for the Shelly USB Charger for Wall Display Stand? +
The Shelly USB Charger requires a standard 230V AC power supply for operation. Ensure that the electrical installation complies with local regulations and standards.
Is the Shelly USB Charger compatible with home automation systems like Home Assistant or MQTT? +
Yes, the Shelly USB Charger is compatible with Home Assistant, MQTT, and can be integrated into various smart home systems for automation and remote control.
What are the typical use cases for the Shelly USB Charger in a smart home environment? +
The typical use cases include charging mobile devices in public spaces such as restaurants, hotels, and offices, as well as integrating it into a home automation setup for controlling power to devices.
What configuration limitations should I be aware of when using the Shelly USB Charger? +
The Shelly USB Charger is limited to powering USB devices that require up to 2.4A. It does not support fast charging protocols and should not be used for devices exceeding this amperage limit.
What troubleshooting steps should I take if the Shelly USB Charger is not functioning correctly? +
If the charger is not functioning, check the following:
- Ensure it is correctly wired to a 230V AC supply.
- Verify connections for any loose wires.
- Check if the connected device is within the amperage limit.
- Restart the device and check for firmware updates via the app.
English
Español
Português PT